Главная  > КАКИЕ НОВОСТИ  > Инновационное обновление  >  Как ультразвуковой твердости может получить результат твердости?

Как ультразвуковой твердости может получить результат твердости?

2021-07-19


 Not  

Ultrasonic Hardness Tester 

 


The traditional method, such as Vickers, is to apply force directly, and then observe the indentation. It use theoptical microscopy system to measure the diagonal of Vickers indention to get Vickers hardness  of materia on benchtop micro-Vickers hardness tester. The traditional Brinell, Rockwell and Vickers hardness tests are not  convenient for on-site measurement, and the Leeb hardne s not the force value and deformation measurement.





In order to be satisfied with the traditional hardness test concept (measurement of force and deformation) and at the same time facilitate field application, the ultrasonic hardness tester adopts the ultrasonic principle and replaces the optical or grating to measure the deformation with the frequency change, so as to realize the real mechanical test on the spot.



  Ultrasonic Hardness Tester 

 


Under a uniform contact pressure, the resonance frequency of the probe changes with the hardness.The purpose of measuring the hardness is achieved by measuring the change of the frequency. The damage of the test piece is  extremely small, which has great advantages compared with the other methods mentioned above.The measuring    principle of the ultrasonic hardness tester is that the diamond indenter of the hardness tester is in contact with the test piece.







   Application

 

    

the flange edge and gear root stamping parts;                                                                                          

molds,                                                       

thin plates; 

surface hardened teeth and gear measurement; 

                                 taper part hardness measurement; 

                                 shaft, thin-walled pipe,

                                 container measurement;

                                 wheel, Hardness measurement of turbine rotor; 

                                 the knife edge of the drill bit; 

                                 welding part;

                                 and so on;





Sinowon Innovation Metrology Manufacture Limited. 

China  National  Authorized  High-Tech Metrology Manufacturer 

Address:  A1, KaiSong Science Park, 2# Baima Xianfeng Road, 

South District, DongGuan, China (Zip Code: 523080) 

Tel: +86-769-23184144;                Fax: +86-769-22854144 

Web: www.sinowon.com;                Email: MZ@SINOWON.com 






Онлайн чат 编辑模式下无法使用
Оставьте свое сообщение inputting