Высококачественный 3D-измерительный аппарат производитель для сканирования

latest_products

Автоматическая измельчитель / полировщик GP-1000A / GP-2000A

Двойная колесо / полировщик GP-202 / 252/302

Costable вакуумный монтаж CMP-250S

Двойная колесо / полировщик GP-202D / 252D / 302D

Информация о продукте
обратная связь

Sinowon высококачественный 3D измерительный аппарат производитель для сканирования-1

Micromea10128 serials CMM combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.

Product Characteristics

◆ Granite fixed worktable, XZ axes are made of high performance aluminium alloy, Good temperature adaptability and faster movement speed.

◆ Granite worktable with integral “dovetail” guide in Y axis, eliminate the pitch and yaw ,also provides superior motion stability.

◆ Z axis air-balance with self-protection ,improve motion capability.

◆ Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stability, lower noise.

◆ High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped.

◆ Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes.

◆ RENISHAW tonic steel scale，Free expansion with the temperature change.

◆ Famous parts from all over the world are used in every important sub systems.

Performance Specifications

Measuring Strokes(mm)			Overall Dimension(mm)				Machine Weight(Kg)	Max. Part Weight (Kg)
X	Y	Z	Lx	Ly	Lz
1000	1200	800	1690	2370	3150		2490	1800
Accuracy is according to ISO 10360 – 2
Maximum permissible error of indication of a CMM for size measurement (μm)						Maximum permissible Probing Error (mm)
1.5 + 3L/1000						1.9
Scale Resolution(μm): 0.1
Dynamic Performance
3D positioning speed(mm/s)						3D acceleration(mm/s²)
530						1200

Environment Specifications

Room Required Specifications
Room Temperature	18～22°C
Temperature Gradient (in time)	1°C /h
Temperature Gradient (in time)	2°C /24h
Temperature Gradient (in the volume)	1°C /m
Humidity Required Specifications
Relative humidity	45-75％
Air Supply System Required Specifications
Min. air pressure	5bar [0.5 MPa]
Air consumption	0.12-0.45m³/min
Electrical requirements
Voltage	220 V ± 10%
Frequency	50/60 Hz
Max Power consumption	1500VA
Current	15 A
Allowed Maximum Floor Vibration
Frequency Range	0 ~ 19 Hz 19~75 Hz > 75 Hz
Maximum Amplitude	0.0011 mm 0.0011~0.002 mm 0.002 mm
A good earth ground (less than 4 W) is required for reliable operation of the electrical controls.

Software Introduction

z******o

The production of Sinowon optical coordinate measuring machine complies with international fire safety standards. It has met the F90 class fire resistance requirements. Adopting ultra-clean steel, the product has obtained an extended bearing life

z******d

The design of Sinowon 3d measuring machine focuses on the basic principles of the following three areas: mechanical behavior, machine elements, and manufacturing processes. The product can withstand heavy inertial forces

c******n

Sinowon optical coordinate measuring machine is exclusively developed with good phone adaptability by the R&D team. It has been proved that it meets safety requirement. It is widely applied in the machinery for its low running resistance

i******j

Quality inspections and tests of Sinowon optical coordinate measuring machine will be carried out by the QC team. It will be scrutinized for different aspects, including bending, impact, compression, hardness, aging, and abrasion resistance performance. The internal structure of the product compensates for shaft deflections and housing distortions caused by the heavy loads

j******x

Sinowon 3d measuring machine is produced under different sophisticated workmanship. The pattern or grain will be manually carved with great delicacy and the board will be cut with high precision within the tolerance of 0.2mm. The roller and thrust bearing are separable, making it easy to conduct maintenance and inspection

t******j

Through the introduction of advanced production concepts, technologies, equipment and talents in the industry, they are put into the production and manufacturing of products, and the costs of manpower, material resources and resources generated in various production processes are rationally planned and managed through scientific means. Controlled, the produced optical coordinate measuring machine has a better price and higher cost performance among products with the same performance and quality, and bulk purchases can save more costs.

product_message

*Имя

Телефон

*Электронной почты

*Содержание